N/s Front Tyre Wear

[28galaxy]

wot causes your n/s front tyre on the out side edge to wear

i,ve had the tracking done and wheels balanced, the other 3 are all fine

no sign of uneven wear i,ve replaced bottom balljoint, droplink.shock,and the top mounting on top of the shock.

[Topbloke]

you would need to get the tracking done with somebody whom could check the camber/caster angles, as i would bet that somthing is bent some where and this would show it up . I use a company called Pro-align they have franchises all over the place so you may be lucky and have one near you, tell them exactly what your problem is and they should point you in the right direction (pun intended )

[Guest vr6galaxy]

I had my XR4X4's suspension set up by Pro-align, it made a lot of difference after it was all set up correctly :rolleyes: they had to to a cut'n'shut job on the rear end to get to line up correctly! but it made the ride and the handling so much better!

[28galaxy]

Thanks for that

 

 

will go and get the camber checked to see wots bent, sounds expensive

[Guest funkmiester]

Going around too many right hand bends.........

[Guest nelse]

Going around too many right hand bends.........

like traffic islands??

[gregers]

it sounds like the dreaded roundabout syndrome it affects everyone who lives in an area of the bloody things every 100 yards

[iainkirk]

I would say there are three main causes here:

 

1) roundabout

2) 2.8 VR6

3) the nut behind the steering wheel

 

 

:lol:

[28galaxy]

I would say there are three main causes here:

 

1) roundabout

2) 2.8 VR6

3) the nut behind the steering wheel

 

 

:lol:

I never thought of number 3